Error Code Reference

KitchenAid Refrigerator Error Code Er gF

This error code indicates a ground fault detection issue in your KitchenAid refrigerator, meaning the appliance has detected an unsafe electrical condition that requires immediate attention. This safety feature prevents potential electrical hazards in your home.

Technical Advisory
Home Error Codes KitchenAid Refrigerator Error Code Er gF

Signs

What you may observe

• Refrigerator stops cooling or runs intermittently • Error code Er gF displays on the control panel • Compressor fails to start or cycles on and off unexpectedly • Ice maker stops producing ice • Interior lights may flicker or dim • Refrigerator may shut down completely for safety

Possible Causes

Root causes behind this error

• Damaged or deteriorated power cord insulation allowing current leakage • Faulty ground fault circuit interrupter (GFCI) outlet in kitchen circuit • Water intrusion into electrical components from condensation or leaks • Defective compressor with internal ground fault • Worn or damaged wiring connections within the appliance • Moisture buildup in control board or relay components • Incompatible or malfunctioning surge protector on outlet • Improper grounding of the kitchen electrical circuit

Safety Checks You Can Do

Steps you can try at home safely

• Check that your kitchen outlet is functioning properly by plugging in another appliance like a lamp • Verify the refrigerator power cord is fully inserted into the outlet with no visible damage or cuts • If using a surge protector, remove it and plug the refrigerator directly into the wall outlet • Locate your home's main circuit breaker panel and confirm the kitchen circuit breaker is in the ON position • Ensure all refrigerator doors are fully closed and sealing properly • Check refrigerator temperature settings to ensure they are set correctly (37-40°F for fridge, 0°F for freezer) • Inspect the back of the refrigerator for blocked air vents and ensure 2-3 inches of clearance from the wall • Unplug the refrigerator from the outlet and wait 60 seconds, then plug it back in to perform a full reset • If the error persists after unplugging, turn off the kitchen circuit breaker for 60 seconds, then turn it back on • Clean accessible condenser coils at the back or bottom of the unit with a soft brush to improve airflow • Verify the refrigerator is level and not tilted, as improper positioning can affect internal components
Your Area

Ready to Book a Service?

Our team is available in your area and ready to help.