Book Now
Error Code Reference

KitchenAid Washer Error Code FdL

This error code indicates a door lock failure or door latch issue on your KitchenAid washer. The washer has detected that the door or lid is not properly secured, preventing the wash cycle from starting or continuing safely.

Technical Advisory
Home › Error Codes › KitchenAid Washer Error Code FdL

Signs

What you may observe

• Washer will not start a wash cycle • Wash cycle stops abruptly mid-operation • Door or lid cannot be opened or closed properly • Error code FdL displays on the control panel • Audible clicking or buzzing sounds coming from the door latch area • Door lock light remains illuminated on the display • Washer remains in a locked state even when power is cycled

Possible Causes

Root causes behind this error

• Door latch assembly is defective or worn out • Foreign objects (coins, buttons, fabric) stuck in the door strike area • Door strike or catch is misaligned or bent • Control board door lock relay has failed • Loose or corroded electrical connections to the door lock solenoid • Moisture accumulation causing electrical resistance in the door lock circuit • Manufacturing defect in the door lock mechanism • Debris preventing proper door seal contact

Safety Checks You Can Do

Steps you can try at home safely

• Turn off the breaker controlling your washer for 60 seconds, then turn it back on to reset the appliance • Verify the circuit breaker for your washer has not tripped; check your home electrical panel • Ensure the washer door or lid is fully closed with no obstructions in the way • Visually inspect around the door frame and latch area for any visible debris, lint, or foreign objects and remove carefully • Check that the door frame is not bent or warped by closing the door gently and observing if it closes evenly • If accessible without disassembly, wipe the door strike and latch area with a dry cloth to remove dust or moisture • Do not force the door open if it is locked; allow the reset cycle to complete • Verify no items are pressed against the exterior door or lid preventing proper closure • Try opening and closing the door several times slowly to see if the latch mechanism engages properly • If the error persists after these checks, contact a certified KitchenAid service technician as internal door lock components may require professional replacement
Your Area

Ready to Book a Service?

Our team is available in your area and ready to help.

Schedule Now Call Us