How to Use the Error Code Guide
01
Identify the Error Code
Check the display panel of your appliance to find the error code being shown. Error codes usually appear as letters, numbers, or a combination of both.
02
Understand the Meaning
Each error code indicates a specific issue such as temperature faults, sensor issues, drainage problems, or electrical malfunctions.
03
Perform Basic Checks
Some error codes can be resolved with simple troubleshooting steps like restarting the appliance, checking connections, or ensuring proper power supply.
04
Book Professional Repair
If the error persists or indicates a technical fault, contact our experienced technicians for accurate diagnosis and safe repair service.
| Error Code | Severity | Meaning | Common Symptom | Action |
|---|---|---|---|---|
| FH | High | Fill Hose Error | Washer fails to fill with water or fills slowly | Get Help |
| F02 | High | Drain Pump Error | Water does not drain from washer drum | Get Help |
| F05 | Medium | Temperature Sensor Error | Washer uses incorrect water temperature | Get Help |
| F06 | High | Motor Tachometer Error | Drum fails to spin or spins erratically | Get Help |
| F07 | High | Basket Drive Error | Basket does not rotate during wash or spin cycles | Get Help |
| F09 | High | Overflow Error | Water overflows from washer tub | Get Help |
| F10 | High | Motor Control Error | Motor fails to start or stops unexpectedly | Get Help |
| F11 | Medium | Communication Error | Control board communication failure | Get Help |
| F13 | Medium | Door Strike Error | Door latch does not engage properly | Get Help |
| F14 | Medium | Water Level Sensor Error | Incorrect water level detection during cycles | Get Help |
| F15 | Medium | Cycle Interruption Error | Wash cycle stops unexpectedly | Get Help |
| F21 / F22 | High | Drain Error | Water remaining in tub after drain cycle | Get Help |
| FdU | High | Flood Detect Error | Washer detects water leaking inside machine | Get Help |
| FdL | High | Flood Detected Low | Water detected in lower housing or pan | Get Help |
| SUD | Medium | Suds Overflow Error | Excessive suds prevent proper drain or spin | Get Help |
| F0E2 | Medium | Mechanical Lock Error | Door lock mechanism fails to engage | Get Help |
| F0E5 | High | Water Supply Error | No water supply detected to washer | Get Help |
| F1E1 | High | Motor Rotor Error | Motor rotor position cannot be determined | Get Help |
| F2E1 | Medium | Pressure Switch Error | Water level pressure switch malfunction | Get Help |
| F3E1 | Medium | Cycle Fault Error | Error detected in wash cycle operation | Get Help |
| F5E1 | Medium | Latch Error | Door will not latch securely | Get Help |
| F5E2 | Medium | Lid Switch Error | Lid switch not responding to open/close | Get Help |
| F5E3 | High | Motor Speed Error | Motor cannot reach required speed | Get Help |
| F7E1 | High | Thermal Overload Error | Motor thermal protector has tripped | Get Help |
| F7E6 | Medium | Thermistor Error | Water temperature sensor not functioning | Get Help |
| F8E1 | High | Rotor Position Error | Motor rotor position sensor failure | Get Help |
| F8E3 | High | Motor Control Board Error | Main control board malfunction affecting motor | Get Help |
| F9E1 | Medium | Encoder Error | Drum position encoder not responding | Get Help |
| LF | Medium | Long Fill Error | Water takes too long to fill the tub | Get Help |
| LD | Medium | Long Drain Error | Water takes too long to drain from tub | Get Help |
| OL | High | Overload Error | Washer detects too many clothes or load unbalance | Get Help |
| PF | Medium | Power Failure Error | Power interrupted during cycle operation | Get Help |
No error codes found
Try a different search term or reset the filters.